While you're driving around Williston, make sure that you have the tools you need to recharge a car's dead battery by keeping jumper cables in the trunk. You'll have to know how to use these cables safely, however, so we've compiled a few tips for keeping you safe while you jump start another vehicle.
Start by placing the first red clamp onto the positive terminal of the working car's battery; this will be larger than its counterpart or display POS or a + symbol for identification. Clip the second red clamp onto the positive terminal on the non-working battery, and place the first of the black clips on the negative terminal beside it.
Now, place the final black clip on a bare metal spot on under the working car's hood and start the ignition to charge the opposite battery. After a few minutes, crank up the ignition and see if it starts up. If the car starts, drive it around for about 15 minutes to ensure the battery is fully charged.
Categories:
Service